I purchased in SATA hard drive adapter in the hopes of transferring data from my WD drive, however, it will not power the drive. I used the same adapter for another external drive with success. After doing some research, I think I may need to replace the power board. I’ve attached photos of my drive and hope you have the replacement part.
Please advise the board number which is etched on the PCB, as the attached photo.
The number is 2060-701640-002
https://www.hddzone.com/wd-2060701640002-pcb-p-276.html is your donor PCB.
When you get this PCB, you need to move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.
The post PCB first appeared on HDDZone.com Blog.